COBALT PACKAGING MACHINERY

  • HOME
  • ABOUT
  • CASE FORMERS
    • 100 CASE FORMER
    • 150 Series Case Former Top/Bottom Sealer
  • COLLATOR
  • PACK STATION
  • VIDEOS
    • #1 Combo Pack Station
    • #2 Nobody Tapes Like Us!
    • #3 Collator 300 Series
    • #4 Collator With Hand Pack
    • #5 Stand-Up Pouches
    • #6 Double Wall Corrugated
    • #7 Divider Case Forming
    • #8 Two Minute Changeover!
    • #9 Grab Conveyor
    • #10 Moving Tape-Head Tech
    • #11 Flat Trays
    • #12 Collating Small Bags
  • PRODUCTS
    • PRODUCT HANDLING & SPECIALTY PACKAGING
  • CONTACT US
    • PRIVACY POLICY



 Cobalt Collator/Case Former Pack Station

Specifications:
 1)  Product and Case Sizes:
  • ​Case Width - 7 Inch Minimum/20 Inch Maximum.
  • Case Length - 7 Inch Minimum/24 Inch Maximum.
  • Case Height - 4 Inch Minimum.
  • Bags larger than 4in long x 4in wide.
  • Cartons down to 1in wide.
  • ​Most Stand-up Pouches, Doy Packs & Block Bottom Bags
​​ 2)  Machine Footprint:​
  • Per Application​​
 3) Electrical Controls
  • 115V Single Phase Incoming Power.
  • 6 foot long power cord.
  • 15A required.
  • 24VDC power for control
  4) Compressed Air
  • 80PSI minimum.
  • .5CFM maximum compressed air required.
  5) Machine Finish
  • Gunmetal gray powder-coat steel parts.
  • Hard Coat Aluminum.
  • Stainless Steel & durable Plastic wear surfaces.
  • Stainless Steel in lieu of Gunmetal powder coat steel available.
Return
E-Mail
Request A Quote
Contact Us
Picture
2694 Prairie St SW
Wyoming, MI 49519

​616-531-2464


Picture
Picture
Picture
Picture
  SITEMAP                                 © 2018| Cobalt Packaging Machinery, LLC