Cobalt 150 Series Case Former
Bottom Sealer Key Features:
1) Eliminates Flap Torqueing & "Tenting" by holding the case stationary & sealing with a moving tape-head.
2) Case Squared & Held Stationary with dual side & end squaring clamps while the tape-head moves underneath and tapes the case bottom.
3) Moving Tape-head seals squared case; improves case quality.
4) 2-Operating Modes - Forming Cases only or Forming/Packing Cases.
5) Case is Bottom Sealed Before It Moves - packed product cannot fall out of the case bottom.
6) Automatic Case Exit Pusher moves finished case out of the Machine.
7) 2-Minute Case Size Changeover with ratchet handle and size scales - no change-parts.
8) Dual 2-Hand Touch Sensor for releasing bottom sealed & packed case.
9) Portable & Height Adjustable with stainless locking casters.
10) 2-inch Tape-head standard.
Bottom Sealer Options:
1) Heavy Wall/Divider Case/Difficult Corrugated Form Cycle accommodates rigid case flap folding.
2) Extended & Undersized Case Size Ranges - includes cases longer, wider or narrower than standard.
3) 2-Hand Touch Sensor Enhanced Operator Cycle with taping motion active only when operator holds 2-Hand Sensors.
4) Tilt Angle for unstable product packing.
5) Adjustable Product Packing "Grab" Conveyor mounted & integrated into Case Former or Stand Alone model available . Adjusts up/down & in/out for
optimum packing height matching the top of open formed case.
6) 3 Inch Tape-head - lift out for tape roll change.
7) Stainless Steel Corrosion Resistant Construction Available.
Top Sealer Key Features:
1) 2-inch Tape-head standard
2) Mounted and integrated into the bottom sealer unit for a compact 72 inch footprint for entire unit.
3) Safety sensor mounted in top sealer unit to prevent case from being sealed if operator fails to engage case hold down unit.
4) Outputs a fully packed and top/bottom sealed case, ready to be palletized.
Bottom Sealer Key Features:
1) Eliminates Flap Torqueing & "Tenting" by holding the case stationary & sealing with a moving tape-head.
2) Case Squared & Held Stationary with dual side & end squaring clamps while the tape-head moves underneath and tapes the case bottom.
3) Moving Tape-head seals squared case; improves case quality.
4) 2-Operating Modes - Forming Cases only or Forming/Packing Cases.
5) Case is Bottom Sealed Before It Moves - packed product cannot fall out of the case bottom.
6) Automatic Case Exit Pusher moves finished case out of the Machine.
7) 2-Minute Case Size Changeover with ratchet handle and size scales - no change-parts.
8) Dual 2-Hand Touch Sensor for releasing bottom sealed & packed case.
9) Portable & Height Adjustable with stainless locking casters.
10) 2-inch Tape-head standard.
Bottom Sealer Options:
1) Heavy Wall/Divider Case/Difficult Corrugated Form Cycle accommodates rigid case flap folding.
2) Extended & Undersized Case Size Ranges - includes cases longer, wider or narrower than standard.
3) 2-Hand Touch Sensor Enhanced Operator Cycle with taping motion active only when operator holds 2-Hand Sensors.
4) Tilt Angle for unstable product packing.
5) Adjustable Product Packing "Grab" Conveyor mounted & integrated into Case Former or Stand Alone model available . Adjusts up/down & in/out for
optimum packing height matching the top of open formed case.
6) 3 Inch Tape-head - lift out for tape roll change.
7) Stainless Steel Corrosion Resistant Construction Available.
Top Sealer Key Features:
1) 2-inch Tape-head standard
2) Mounted and integrated into the bottom sealer unit for a compact 72 inch footprint for entire unit.
3) Safety sensor mounted in top sealer unit to prevent case from being sealed if operator fails to engage case hold down unit.
4) Outputs a fully packed and top/bottom sealed case, ready to be palletized.