COBALT PACKAGING MACHINERY

  • HOME
  • ABOUT
  • CASE FORMERS
    • 100 CASE FORMER
    • 150 Series Case Former Top/Bottom Sealer
  • COLLATOR
  • PACK STATION
  • VIDEOS
    • #1 Combo Pack Station
    • #2 Nobody Tapes Like Us!
    • #3 Collator 300 Series
    • #4 Collator With Hand Pack
    • #5 Stand-Up Pouches
    • #6 Double Wall Corrugated
    • #7 Divider Case Forming
    • #8 Two Minute Changeover!
    • #9 Grab Conveyor
    • #10 Moving Tape-Head Tech
    • #11 Flat Trays
    • #12 Collating Small Bags
  • PRODUCTS
    • PRODUCT HANDLING & SPECIALTY PACKAGING
  • CONTACT US
    • PRIVACY POLICY
Cobalt 100 Series Case Former

​Key Features:
​ 1)  Eliminates Flap Torqueing & "Tenting"
by holding the case stationary & sealing with a moving tape-head.
​ 2)  Case Squared & Held Stationary with dual side & end squaring clamps while the tape-head moves underneath and tapes the case bottom.
​ 3)  Moving Tape-head seals squared case; improves case quality.
​ 4)  2-Operating Modes - Forming Cases only or Forming/Packing Cases.
​ 5)  Case is Bottom Sealed Before It Moves
- packed product cannot fall out of the case bottom.
​ 6)  Automatic Case Exit Pusher moves finished case out of the Machine.
 7)  2-Minute Case Size Changeover with ratchet handle and size scales - no change-parts.
​ 8)  Dual 2-Hand Touch Sensor for releasing bottom sealed & packed case.
​ 9)  Portable & Height Adjustable with stainless locking casters.
10)  2-inch Tape-head standard.

Options:

​ 1)  Heavy Wall/Divider Case/Difficult Corrugated Form Cycle accommodates rigid case flap folding.
​ 2)  Extended & Undersized Case Size Ranges
- includes cases longer, wider or narrower than standard.  
​ 3)  2-Hand Touch Sensor Enhanced Operator Cycle
with taping motion active only when operator holds 2-Hand Sensors.
​ 4)  Tilt Angle for unstable product packing.
​ 5)  Adjustable Product Packing "Grab" Conveyor mounted & integrated into Case Former.  Adjusts up/down & in/out for optimum packing 
      height matching the top of open formed case.
​ 6)  3 Inch Tape-head - lift out for tape roll change.
​ 7)  Stainless Steel Corrosion Resistant Construction Available.

​
Read More
E-Mail
Request A Quote
Contact Us
Picture
2694 Prairie St SW
Wyoming, MI 49519

​616-531-2464


Picture
Picture
Picture
Picture
  SITEMAP                                 © 2018| Cobalt Packaging Machinery, LLC